What are Thermal Break Aluminum Doors and Windows? Aluminum doors and windows are familiar to everyone, but what are Thermal Break Aluminum Doors and Windows? They are an upgraded version of aluminum doors and windows, offering enhanced functionality, including improved thermal and sound insulation. Below is a detailed introduction. Why Thermal Break Aluminum Doors and Windows Need to Be Thermally Broken? Aluminum itself has high thermal conductivity, and aluminum profiles occupy a significant area in aluminum doors and windows. Therefore, excessively high or low temperatures can easily have a significant impact on the indoor environment. In summer, the indoor temperature becomes very hot, and in winter, heating dissipates quickly, making it even colder. Therefore, thermal break aluminum doors and windows are designed to reduce heat transfer. How do Thermal Break Aluminum Doors and Windows work? To reduce heat transfer within the aluminum frame, insulating materials are added to fill the cavities, such as PA66 nylon thermal break strips, polyurethane, PVC, etc. When heat passes through the aluminum frame, the insulating material significantly reduces heat transfer. Aluminum frames typically have a...

An aluminum hollow profile is made by extruding aluminum. It is a common aluminum material used in daily life and is also part of aluminum profiles. Common examples of aluminum hollow profiles include aluminum door frames, aluminum window frames, aluminum furniture, aluminum heat sink, industrial aluminum profiles, car frames, and so on. The basic properties of aluminum hollow profile hollow aluminum profiles have the characteristics of light weight, high strength, corrosion resistance, durability, environmental friendliness and safety. Therefore, they can replace many materials, such as commonly used wooden materials, PVC materials and steel materials. As of 2025, aluminum hollow profiles still occupy the majority of the market share. The difference between aluminum hollow profile and solid aluminum profile AppearanceAluminum hollow profile: From its appearance, it can be seen that the interior of the hollow aluminum profile has a cavity structure. Moreover, it comes in a wide range of colors and various surface treatment options, giving it a three-dimensional appearance and a pleasing look.Solid aluminum profiles: The exterior is relatively simple, basically consisting of a solid strip-like structure, giving an impression...

How to customize T-slot aluminum profile? First, we should understand what T-slot aluminum profiles are, what the customization process is like, what preparations are needed, and how to avoid some wrong steps. Shenghai Aluminum will provide you with specific answers. What is T-slot aluminum profile? From the English words, it can be seen that it should have a T-shaped feature. In fact, T-slot aluminum profile is a long strip of aluminum profile extruded by machines. Its most distinctive feature is the T-shaped groove. It is also because of this groove that T-slot aluminum profile has unique functional characteristics. It can be easily fixed with various parts such as T-bolts, nuts, L-shaped connectors and straight connectors, allowing the aluminum profiles to form a multi-shaped and sturdy DIY aluminum profile frame. What are the advantages of T-slot aluminum profiles? They can be DIY-shaped Due to the special modular structure of T-slot aluminum profiles, many types of products can be DIY designed, such as cabinets, wardrobes, tables, mirrors and picture frames. They have the characteristics of durability, beauty and no formaldehyde, and are...

Aluminum profile are a type of metal material produced through specific techniques. They come in various shapes, and the shape of the aluminum profiles produced will differ depending on the mold used. When choosing aluminum profile, many manufacturers, traders, and distributors often need to consider many factors. Shenghai Aluminum will provide a detailed introduction on how to select aluminum profiles and solve various problems encountered. Aluminum profiles are typically produced from aluminum rods using various methods such as extrusion, rolling, casting, forging, superplastic forming, and powder metallurgy. Extrusion is the most common and popular method, producing aluminum profiles for furniture, decorative purposes, baseboards, doors and windows. The following section details various aspects to consider when selecting aluminum profiles. How to choose aluminum profile materials? Why should we pay attention to material selection? Because incorrect material selection not only leads to cost waste and substandard product performance, but also may cause safety hazards in scenarios with strict safety requirements. Therefore, material selection is also a significant matter. Common grade selection Common grades and classifications include international standards (AA), Chinese national standards...

The quenching process of aluminum profiles is an important procedure in the aluminum industry. So, how does it work? Shenghai Aluminum will introduce to you its principle, steps, applications, and precautions, etc.   Principle Quenching treatment of aluminum profiles is an important production process in the production of aluminum profiles and a key link in the heat treatment process. Aluminum profiles that have undergone quenching treatment can enhance their strength and hardness and increase their compressive resistance.   Why is quenching necessary for aluminum profiles? 1. From a physical perspective, it mainly increases strength and hardness. Aluminum profiles that have undergone quenching treatment can significantly enhance their strength and hardness. 2.From the perspective of elemental composition, since alloying elements such as Mg and Si in aluminum profiles tend to form unstable phases at high temperatures, this can easily weaken the solid solution strengthening effect, potentially leading to a decrease in tensile strength; a reduction in plasticity and elongation; a decline in corrosion resistance, with dark spots likely to appear on the surface during oxidation; and cracking of the profiles, resulting...

The following is an introduction to the aluminum profile powder coating process, including its meaning, steps, and advantages, etc. It is hoped that it can be helpful to everyone. Overview The aluminum profile powder coating process is a systematic surface treatment technology that uses solid powder coatings as raw materials. Through electrostatic adsorption and thermal curing techniques, it forms a continuous and dense protective and decorative coating on the surface of aluminum profiles. This process endows aluminum profiles with excellent weather resistance, corrosion resistance, mechanical strength, and aesthetic appeal, making it an important technical means in the aluminum processing industry. steps Pass through the machine for grinding → Spray the upper row (vertical ones need to be drilled) → Clean the blank → Dry the blank → Electrostatic spraying→Curing and removal from the furnace→Surface inspection 1.Polishing: Check if the material is clean, smooth and free of mechanical marks. 2.Spray the upper row: Check the surface for scratches, particles, etc., and perform air-blowing and sanding. 3. Cleaning: 1) Objective: The cleaning agent is used for degreasing, that is, removing oil.2) Pre-degreasing...

Today, I finally finished installing the Aluminum Skirting Profile. The final result is quite good. After the installation, the biggest impression I got was that this process is actually not difficult. I'm a beginner, and I believe everyone can complete it. This article will specifically talk about this process for you, hoping to be helpful to everyone. Although the installation process is not difficult, there are still some matters that need to be noted, and personal safety should also be taken into consideration. After all, it involves the use of certain tools, so it is necessary for everyone to go through the entire process. Tool Preparation I usually enjoy doing DIY work with aluminum profiles, so all my tools are purchased by myself. This includes a cordless lithium battery electric hammer, which has been very helpful during the installation process. There are also other tools such as 6mm screws, 6mm hoses, 6mm drill bits, markers, aluminum cutting machines, towels, and rubber hammers, etc. Why did we choose aluminum alloy? A friend asked why we chose aluminum alloy instead of other...

What is aluminum extrusion? I believe everyone has this question. We can understand it from its principle, classification, advantages, steps, applications, and how to choose, etc. I believe it can solve this confusion for everyone. Principle The principle of aluminum extrusion is that the aluminum alloy material is heated to the required temperature, reaching a state where it can be freely controlled. At this point, pressure is applied to deform the aluminum billet inside the mold, and finally, it becomes an aluminum extrusion product with a specific cross-section. The Steps Of Aluminum Extrusion 1. Preparation Of Raw Materials Aluminum rods are usually used as raw materials. The aluminum alloy grade, such as 6061, 6063, etc., should be determined according to the required product. After selection, we also need to clean them to remove impurities. 2. Heating Before extrusion, the material should be heated to around 500℃ to ensure smooth extrusion into the corresponding shape. The temperature should not be too high, otherwise it will cause the aluminum to become too soft. 3. Preparing The Mold We at Shenghai can customize...

When choosing window and door materials, factors such as waterproofing, durability, insulation, soundproofing, appearance, budget and climate need to be considered. Common materials include aluminum, plastic steel (PVC), wood, aluminum-clad wood and stainless steel. Which material is the best? Aluminum windows and doors are also a good choice. What Is The Trend Of Aluminum Doors And Windows? Global Market Aluminum doors and windows have occupied 50% of the market share. This is mainly due to the increased usage of aluminum materials in emerging markets such as Southeast Asia and the Middle East, as well as the upgrading and replacement of aluminum doors and windows in developed countries like Europe and the United States, which has enhanced their share in the high-end market. The Chinese Market Aluminum doors and windows account for 60% of the market share, occupying a considerable portion. This is mainly due to China being the world's largest producer and consumer of aluminum doors and windows. Over the past decade, the proportion of aluminum alloy usage has risen from 45% to 68%, mainly thanks to the rise of...

What is the difference between aluminum and extruded aluminum? Aluminum is an unprocessed plastic material. Aluminum profiles are products produced by aluminum extrusion process, which have higher strength, unlimited length and strong designability. 1.Aluminum Aluminum is a basic metal material, essentially a raw material, typically obtained through direct mining. Common forms of aluminum include: Cast Parts：commonly used in automotive parts, aerospace, machinery and hardware, consumer electronics (mobile phone/laptop midframes), and heat sink casings. Sheets (Used For Stamping Or Rolling)：typically 0.2 to 200mm thick. Common metal cans (both the body and lid) for cola, beer, juice, and the like are made from aluminum sheet. Rods/Wires (Used For Drawing)：generally higher in strength, are commonly used to make screws/nuts/bolts, and gears. Castings (Used For Complex Shapes)：commonly used in engine blocks/cylinder heads, LED lighting radiators, and bathtub faucet bodies. Thus, aluminum is a raw material that has not undergone specific plastic processing and must undergo further processing to be manufactured into finished products. 2. Extruded Aluminum This is a highly processed aluminum product, produced through an extrusion process. The aluminum is heated, forced into...

When purchasing high-quality aluminum profiles, we often wonder what type to choose. Actually, there's a lot to learn about aluminum profiles. Below is some helpful information about aluminum profiles, hoping it will help you avoid wasting money. 1. Basic Properties of Aluminum Aluminum, a silvery-white metal, is the most abundant metal element in Earth’s crust (~8.3% by mass). It forms a protective oxide film in moist air, enhancing corrosion resistance though it may dull over time when exposed. With a low relative density of 2.7 g/cm³, it is lightweight; it melts at 660.37°C and boils at 2327°C. Boasting high specific strength (excellent strength-to-weight ratio), good electrical conductivity (second only to silver and copper, ideal for high-voltage lines), and exceptional thermal conductivity (~3x iron’s, suited for radiators), it also excels in reflectivity (for mirrors/coatings) and oxidation resistance, reinforced by its oxide layer. 2. Types Profiles: high-quality aluminum profiles, aluminum tubes, aluminum bars, etc. Sheets: Aluminum sheet, aluminum foil, aluminum strip (coil) Castings: Aluminum castings, aluminum pellets 3. Commonly Used Grades The first digit of the grade indicates the aluminum alloy series,...

This is an article about choosing between aluminum profiles and steel. It mainly talks about which is cheaper, aluminum profiles or steel. It introduces the differences and advantages of the two from the perspectives of raw materials, processing, cost, maintenance, etc., so as to help you choose the material that meets your needs and expectations. I hope it can help those in need.   Raw Materials The raw materials for aluminum profiles are more expensive than steel. The price of aluminum ingots (approximately 20,000 yuan/ton) is higher than that of ordinary steel (approximately 5,000 yuan/ton). However, the price of high-strength aluminum alloys (such as 7075) is close to that of specialty steel. Processing Costs Aluminum profiles are primarily extruded. Compared to steel rolling, the energy consumption is only one-third of that of steel, and the processing efficiency is much higher than that of steel. Therefore, aluminum profiles are more suitable for high-end customization needs. Overall cost is similar between the two. Transportation Costs Due to the low density of aluminum profiles, they are lighter. In terms of volume, steel is...